2010 Ford C-Max 1.6 TDCi (110) Ghia DPF – Workshop Service & Repair Manual

1. Diagnose the Problem: Check for warning lights or unusual noises coming from the turbocharger.
2. Inspect the Turbocharger: Look for signs of oil leaks, excessive shaft play, or damaged components.
3. Clean the Turbocharger: Use a turbo cleaner to remove any debris or carbon buildup.
4. Replace Faulty Parts: If necessary, replace the turbocharger or damaged components.
5. Verify Installation: Ensure that the turbocharger is properly installed and connected.

Our manual provides detailed procedures and troubleshooting tips for turbocharger issues. Download now to get comprehensive guidance on fixing turbocharger failures.

1. Identify the Leak: Check around the coolant pump for any signs of leaking coolant.
2. Drain the Coolant: Safely drain the coolant from the system.
3. Remove the Old Pump: Disconnect the coolant pump and remove it.
4. Install a New Pump: Fit the new coolant pump and ensure it is securely attached.
5. Refill and Test: Refill the coolant and test the system for leaks.

For a step-by-step guide on replacing the coolant pump, our manual offers detailed instructions. Access the manual here to handle coolant pump leaks effectively.

1. Check for Symptoms: Look for rough idling, poor acceleration, or increased emissions.
2. Remove the Intake Manifold: Disassemble the intake manifold to access the intake valves.
3. Clean the Valves: Use a valve cleaning solution and a brush to remove carbon deposits.
4. Reassemble the Components: Put the intake manifold back in place and secure it.
5. Test the Engine: Start the engine and check for improvements in performance.

Our manual includes detailed cleaning procedures for intake valves. Get your copy here to effectively tackle carbon buildup issues.

1. Check Fluid Levels: Ensure the transmission fluid is at the correct level and condition.
2. Inspect the Transmission: Look for signs of leaks or damage.
3. Replace the Transmission Fluid: If the fluid is dirty or low, replace it with fresh fluid.
4. Test Drive: Drive the vehicle to see if the slipping persists.
5. Seek Professional Help: If slipping continues, consult a professional for a more thorough diagnosis.

For a comprehensive guide on addressing transmission slipping, our manual offers expert advice and solutions. Download the manual here to resolve transmission issues with confidence.

1. Diagnose the Fault: Check if the issue is with the window motor, switch, or wiring.
2. Inspect the Wiring: Look for loose or damaged wires in the door panel.
3. Test the Window Motor: Use a multimeter to check if the motor is receiving power.
4. Replace Faulty Components: Replace any defective window motors or switches.
5. Reassemble and Test: Put everything back together and test the window mechanism.

Our manual provides in-depth troubleshooting for electrical faults. Access it here to effectively address electrical issues in your Ford C-Max.