2010 Ford C-Max 2.0 TDCi (136) Titanium Styling-Pkg. DPF PowerShift (d-cl. 6) – Workshop Service & Repair Manual

1. Run a Diagnostic Scan: Use an OBD-II scanner to identify error codes related to electrical components.
2. Check the Battery and Alternator: Ensure the battery is fully charged and the alternator is functioning correctly.
3. Inspect Wiring and Connections: Look for loose or damaged wires and connectors. Repair or replace as needed.
4. Test Electrical Components: Verify the operation of individual components such as lights and windows with a multimeter.

Our manual offers detailed troubleshooting and repair instructions for electrical issues to help you resolve these problems efficiently.

1. Listen for Abnormal Noises: Pay attention to any unusual sounds like whining or rattling from the turbocharger.
2. Check for Oil Leaks: Inspect the turbocharger and surrounding areas for oil leaks. Tighten fittings or replace gaskets as necessary.
3. Measure Boost Pressure: Use a boost gauge to ensure the turbocharger is producing the correct amount of pressure.
4. Clean or Replace the Turbocharger: Follow the manual’s guidance on cleaning or replacing the turbocharger if needed.

Our manual provides specific steps for turbocharger maintenance and repair to ensure your system operates efficiently.

1. Check for Warning Lights: Look for dashboard indicators related to the DPF. This often signals clogging or other issues.
2. Initiate Regeneration: Perform a DPF regeneration process to burn off soot and clear blockages. Refer to the manual for precise instructions.
3. Inspect the DPF: If regeneration doesn’t resolve the issue, check the DPF for excessive soot buildup or damage.
4. Consider Cleaning or Replacing: Follow our manual’s recommendations for cleaning or replacing the DPF if necessary.

Our manual provides clear instructions for managing and maintaining the DPF to prevent clogging and ensure proper function.

1. Check for Error Codes: Use a diagnostic tool to read any error codes related to the PowerShift transmission.
2. Inspect Fluid Levels: Verify that the transmission fluid is at the correct level and top up if needed.
3. Examine Fluid Quality: Check the condition of the transmission fluid for contamination or burning smell.
4. Test the Transmission: Perform a test drive to identify any issues with shifting or slipping. Consult the manual for detailed troubleshooting.

Our manual includes step-by-step instructions for diagnosing and repairing PowerShift transmission issues to help you keep your vehicle in top condition.

1. Inspect Suspension Components: Check the condition of the shocks, struts, and springs for signs of wear or damage.
2. Listen for Unusual Noises: Pay attention to clunking or squeaking noises while driving, which can indicate suspension issues.
3. Check Alignment: Verify if the vehicle’s alignment is off. Misalignment can cause uneven tire wear and handling problems.
4. Replace Worn Parts: Follow the manual’s guidance on replacing worn or damaged suspension components.

Our manual provides comprehensive instructions for diagnosing and repairing suspension issues, ensuring a smooth and safe driving experience.