2010 Ford C-Max 2.0 TDCi (136) Zetec DPF PowerShift (d-cl. 6) – Workshop Service & Repair Manual

1. Check the DPF Warning Light: If the warning light is on, your DPF may be blocked.
2. Perform a Regeneration: Drive at a consistent speed on the highway (usually over 40 mph) for about 20 minutes to allow the DPF to regenerate.
3. Manual Cleaning: If regeneration fails, manually clean the DPF by removing it and using a DPF cleaner.
4. Replace if Necessary: If the DPF is severely blocked and cleaning doesn't work, replacement may be necessary.

Our Workshop Service & Repair Manual provides a detailed guide on DPF maintenance and cleaning procedures, ensuring your vehicle remains compliant with emission standards.

1. Check for Software Updates: Sometimes, updating the transmission software can resolve shifting issues.
2. Inspect Transmission Fluid: Ensure the transmission fluid is at the correct level and replace it if it appears dirty or burnt.
3. Reset the Transmission: Disconnect the battery for 30 minutes to reset the transmission control module.
4. Seek Professional Help: If problems persist, a professional diagnostic may be necessary to identify mechanical issues.

Our manual offers comprehensive instructions on PowerShift transmission maintenance, fluid replacement, and troubleshooting common issues.

1. Check the Battery: A weak battery can cause random electrical faults. Ensure it’s fully charged or replace it if necessary.
2. Inspect Wiring and Connectors: Loose or corroded connectors can cause erratic behavior. Check all wiring, especially around the boot area.
3. Reset the ECU: Disconnect the battery for a few minutes to reset the electronic control unit, which may resolve random faults.
4. Update Software: Ensure all vehicle software is up to date, as updates may fix bugs causing these issues.

Our Workshop Manual provides detailed wiring diagrams and troubleshooting tips to help you address electrical issues efficiently.

1. Check Tire Pressure: Ensure your tires are inflated to the recommended pressure.
2. Inspect Wheel Alignment: Misalignment can cause uneven tire wear. Get the alignment checked and adjusted if necessary.
3. Rotate Tires Regularly: Rotating tires every 6,000 to 8,000 miles can help distribute wear evenly.
4. Check Suspension Components: Worn-out suspension parts can cause uneven tire wear. Inspect and replace them as needed.

Our manual includes step-by-step guidance on checking tire pressure, alignment procedures, and suspension maintenance to help extend the life of your tires.

1. Reattach or Replace Sealing Strips: Inspect the door seals. If they are loose, reattach them using adhesive, or replace them if they are worn.
2. Lubricate Window Mechanisms: Use a silicone spray to lubricate the window tracks, ensuring smooth operation.
3. Check for Obstructions: Ensure there is nothing obstructing the window tracks that could cause the mechanism to fail.
4. Inspect and Replace Parts: If the window mechanism is still faulty, inspect the motor and regulator, and replace any worn-out parts.

Our Workshop Manual offers detailed instructions on door and window maintenance, ensuring your vehicle remains quiet and comfortable.