2010 Ford C-Max 2.0 TDCi (136) Zetec DPF – Workshop Service & Repair Manual

1. Check the Battery and Alternator: Ensure the battery is fully charged and the alternator is functioning correctly. Use a multimeter to check voltage levels.
2. Inspect Fuses and Wiring: Look for any blown fuses or damaged wiring. Replace any faulty fuses and repair or replace damaged wiring.
3. Test Electrical Components: Use a diagnostic tool to test electrical components such as relays and switches.
4. Consult the Manual: Refer to our manual for detailed wiring diagrams and troubleshooting steps.

Our manual provides in-depth troubleshooting guides for electrical issues. Download it now to get precise instructions and keep your system running smoothly.

1. Check for Leaks: Inspect the turbocharger and associated piping for leaks or damage. Tighten or replace any leaking connections.
2. Examine the Turbocharger: Look for signs of excessive play or damage in the turbocharger. Replace if necessary.
3. Clean the Turbocharger: Ensure the turbocharger and its components are clean and free from carbon buildup.
4. Verify Oil Supply: Check that the turbocharger is receiving proper oil supply and that there is no contamination.

For comprehensive turbocharger maintenance and repair instructions, get our manual today and address issues effectively.

1. Inspect the EGR Valve: Check for any carbon buildup or clogging. Remove the valve if needed.
2. Clean or Replace the Valve: Clean the EGR valve using a suitable cleaner or replace it if cleaning is insufficient.
3. Check for Fault Codes: Use a diagnostic scanner to check for any error codes related to the EGR system.
4. Inspect EGR Components: Ensure that all related components, like the EGR cooler and pipes, are functioning properly.

Our manual includes detailed cleaning and replacement procedures for the EGR valve. Download it here to ensure proper maintenance.

1. Perform a Regeneration: Follow the manual's instructions to perform a forced regeneration of the DPF to clear out accumulated soot.
2. Check for Blockages: Inspect the DPF for any physical blockages or damage.
3. Verify Sensors: Ensure that DPF sensors and temperature probes are functioning correctly.
4. Regular Maintenance: Follow the recommended maintenance schedule to prevent future clogging.

For detailed steps on DPF regeneration and maintenance, download our manual for expert guidance.

1. Inspect Brake Pads and Discs: Check for wear and tear on brake pads and discs. Replace them if they are worn out.
2. Check Brake Fluid: Ensure brake fluid levels are adequate and the fluid is in good condition.
3. Examine Brake Lines: Inspect brake lines for leaks or damage and repair as necessary.
4. Test Brake System Components: Use diagnostic tools to test the ABS system and other brake-related components.

Our manual provides detailed brake system maintenance and repair procedures. Access it now to keep your braking system in top condition.