2010 Ford C-Max 2.0 TDCi (163) Titanium – Workshop Service & Repair Manual

1. Inspect the Weather Strip: Check the weather strip around the door frame for any signs of wear or detachment.
2. Clean the Area: Use a mild cleaner to remove any dirt or debris from the weather strip and door frame.
3. Reposition the Weather Strip: If the strip is loose but not damaged, carefully press it back into place. Ensure it fits snugly.
4. Replace if Necessary: If the strip is damaged, purchase a new weather strip and install it by aligning it correctly and pressing it into the grooves.

For more detailed instructions and diagrams, refer to our Workshop Service & Repair Manual (PDF).

1. Identify the Leak Source: Inspect the transmission for signs of leaking fluid, typically around the seals or gaskets.
2. Check Fluid Levels: Verify that the transmission fluid level is within the recommended range.
3. Replace Seals or Gaskets: If you find a leak, replace the faulty seals or gaskets as per the manual's guidance.
4. Refill Transmission Fluid: Add the correct type and amount of transmission fluid as specified in the manual.

Our manual provides step-by-step instructions for handling transmission leaks effectively.

1. Locate the Coolant Pump: Find the coolant pump based on the diagrams in the manual.
2. Inspect for Leaks: Check for any signs of coolant leakage around the pump.
3. Replace the Pump: If leaking, follow the manual's instructions to remove and replace the coolant pump.
4. Refill Coolant: Refill the cooling system with the appropriate coolant and check for leaks after installation.

Refer to our manual for detailed replacement procedures and parts specifications.

1. Check the Battery: Ensure the key fob battery is not depleted. Replace it if necessary.
2. Inspect the Keyless Entry Module: Examine the module for any visible issues or loose connections.
3. Reprogram the Key Fob: If the battery is fine, you may need to reprogram the key fob. Follow the reprogramming steps in the manual.
4. Consult a Professional: If the problem persists, consult a professional mechanic for further diagnostics.

Our manual includes detailed instructions on troubleshooting and reprogramming the keyless entry system.

1. Check Battery Voltage: Use a multimeter to ensure the battery voltage is within the correct range.
2. Inspect Fuses and Relays: Examine fuses and relays for any signs of damage or failure.
3. Review Wiring Connections: Look for loose or damaged wiring connections.
4. Consult the Manual: Use the electrical troubleshooting section in the manual to diagnose and fix specific electrical issues.

Our manual provides comprehensive guidance on diagnosing and repairing electrical issues.