2011 Ford C-Max 1.6 Ti-VCT (105) Trend (Zetec) – Workshop Service & Repair Manual

1. Check the Battery: Ensure the battery is fully charged and the terminals are clean and securely connected.
2. Inspect the Fuel System: Verify that there is sufficient fuel in the tank and check the fuel pump for any issues.
3. Examine the Spark Plugs: Remove and inspect the spark plugs for wear or damage, and replace if necessary.
4. Test the Ignition Coils: Faulty ignition coils can cause starting issues. Test and replace if needed.
5. Check the Fuel Filter: A clogged fuel filter can impede fuel flow. Replace the filter if it’s clogged.

How Our Manual Helps: Our Workshop Service & Repair Manual provides detailed troubleshooting steps and diagrams to help you diagnose and fix engine stalling issues effectively.

1. Inspect the Refrigerant Level: Check if the refrigerant is low and recharge if necessary.
2. Examine the A/C Compressor: Ensure the compressor is engaging and functioning correctly.
3. Check the A/C Clutch: If the clutch is not operating, it may need adjustment or replacement.
4. Inspect the A/C Condenser: Ensure the condenser is not blocked or damaged.
5. Look for Leaks: Check the system for refrigerant leaks and repair as needed.

How Our Manual Helps: Our manual includes comprehensive guides and diagrams for diagnosing and repairing A/C system issues, ensuring you can restore optimal cooling performance.

1. Check Transmission Fluid Level: Ensure the fluid level is adequate and top up if necessary.
2. Inspect for Leaks: Look for any leaks around the transmission and address them promptly.
3. Examine the Transmission Filter: A clogged filter can cause slipping. Replace if needed.
4. Test the Transmission Fluid Condition: If the fluid is burnt or dirty, a transmission flush may be required.
5. Check Transmission Mounts: Worn mounts can cause slipping. Replace them if necessary.

How Our Manual Helps: Our manual offers step-by-step instructions and diagrams for diagnosing and fixing transmission issues, helping you address slipping problems efficiently.

1. Check Fuses: Inspect and replace any blown fuses in the fuse box.
2. Test the Battery and Alternator: Ensure the battery and alternator are functioning properly.
3. Inspect Wiring and Connectors: Look for loose or damaged wiring and connectors.
4. Examine Electrical Grounds: Ensure all ground connections are clean and secure.
5. Scan for Error Codes: Use a diagnostic scanner to identify specific electrical faults and address them.

How Our Manual Helps: Our manual provides detailed electrical diagrams and troubleshooting tips to help you resolve electrical issues effectively.

1. Inspect Suspension Components: Check for worn or damaged parts such as struts, shocks, and bushings.
2. Examine the Alignment: Ensure the vehicle’s alignment is correct and adjust if necessary.
3. Check for Loose or Damaged Parts: Look for any loose or damaged suspension components and replace them.
4. Inspect the Tires: Uneven tire wear can indicate suspension issues. Replace or rotate tires as needed.
5. Test the Struts and Shocks: Replace if they are worn or damaged.

How Our Manual Helps: Our manual includes detailed suspension system guides and troubleshooting steps to help you address and repair suspension noise and issues effectively.