2012 Ford C-Max 1.6 TDCi (115) Trend (Zetec) – Workshop Service & Repair Manual

1. Diagnose the Problem: Check for any blown fuses or faulty wiring by inspecting the fuse box and wiring harness.
2. Test Electrical Components: Use a multimeter to test battery voltage, alternator output, and the functionality of switches and relays.
3. Inspect Connections: Ensure all electrical connections are secure and free of corrosion.
4. Consult the Manual: Refer to the wiring diagrams and electrical troubleshooting guides in the manual for specific circuits and components.

Need more help? Our manual provides detailed diagnostic procedures and wiring diagrams to guide you through electrical repairs effectively.

1. Remove the Old Weather Strip: Carefully peel off the loose weather strip from the door frame.
2. Clean the Surface: Remove any adhesive residue and clean the surface with a mild solvent.
3. Apply New Weather Strip: Install a new weather strip by pressing it firmly into place, ensuring it aligns properly with the door frame.
4. Check for Proper Fit: Close the door to ensure the weather strip creates a proper seal.

For detailed installation tips and diagrams, refer to our manual for step-by-step instructions.

1. Identify the Leak Source: Check the transmission pan, seals, and gaskets for signs of leakage.
2. Replace Faulty Seals: If a seal is leaking, replace it with a new one.
3. Inspect the Transmission Pan: Ensure the pan is not cracked or damaged and replace it if necessary.
4. Refill Transmission Fluid: After repairs, refill the transmission with the correct type and amount of fluid.

Our manual provides in-depth repair instructions and maintenance tips to help you address transmission issues confidently.

1. Locate the Leak: Check the coolant pump and surrounding areas for signs of leakage.
2. Drain the Coolant: Drain the coolant from the system before removing the pump.
3. Replace the Coolant Pump: Remove the old pump, clean the mounting surface, and install a new pump.
4. Refill Coolant and Check for Leaks: Refill the coolant and run the engine to check for any remaining leaks.

Detailed replacement procedures and maintenance tips are available in our manual to guide you through the repair process.

1. Check the Battery: Replace the battery in the key fob if it is dead or weak.
2. Inspect the Keyless Entry Module: Ensure the module is securely connected and not damaged.
3. Reprogram the Key Fob: Follow the reprogramming procedure outlined in the manual if the key fob is not recognized.
4. Test the System: Verify that the keyless entry system operates correctly after performing these steps.

Our manual includes detailed troubleshooting and reprogramming instructions to help you resolve keyless entry issues efficiently.