2013 Ford Fiesta 1.5 TDCi (75) Ambiente – Workshop Service & Repair Manual

• Inspect for Leaks: Look for signs of fuel leakage around the injectors or any unusual fuel odors.
• Check Connections: Ensure the injector connections are tight and secure.
• Clean and Inspect: Remove the injectors, clean the area, and inspect for worn O-rings or seals. Replace them if needed.
• Reinstall and Test: Reinstall the injectors and check for leaks after starting the engine.

Our manual offers step-by-step guidance with diagrams for injector maintenance and repair.

• Assess the Damage: Examine the affected areas for bubbling paint or flaking rust.
• Sand and Clean: Use sandpaper or a wire brush to remove rust completely.
• Apply Rust Converter: Treat the area with rust converter to prevent further damage.
• Paint and Seal: Prime and repaint the affected area with matching paint, then seal with a clear coat.

Refer to the manual for a complete guide to rust removal and prevention.

• Locate the Valve: Use the manual to identify the EGR valve’s location.
• Remove and Clean: Disconnect it carefully, clean it with an EGR valve cleaner to remove carbon buildup.
• Inspect and Replace: Check for wear or damage; replace the valve if necessary.
• Reinstall and Test: Reinstall the valve and test for proper functioning.

The manual includes detailed instructions and illustrations for EGR valve cleaning and replacement.

• Inspect Oil Condition: Check the oil level and condition; dark, sludgy oil suggests neglect.
• Clean or Replace the Oil Pickup: Remove the oil pan and clean the oil pickup screen thoroughly. Replace if damaged.
• Perform Oil Change: Drain and replace the oil and filter to remove contaminants.
• Reassemble and Test: Reinstall components and check for normal oil pressure.

Consult the manual for detailed diagrams and instructions to address oil pickup issues effectively.

• Check Fluid Levels: Ensure transmission fluid is at the correct level and in good condition.
• Inspect Cables: Examine the shift linkage and cables for damage or misalignment.
• Scan for Errors: Use an OBD-II scanner to diagnose error codes related to transmission issues.
• Inspect Solenoids: Test the transmission solenoids and replace any faulty ones.

The manual provides a step-by-step troubleshooting guide for transmission problems.