Peugeot 807 Workshop Manual and Repair Guide
A Peugeot 807 workshop manual gives owners, technicians and independent garages the model-specific information needed to maintain, diagnose and repair this people carrier.
This category covers vehicles from 2002–2014, including 2.0-liter and 2.2-liter HDi diesels, FAP/PEF versions, petrol engines, and the 3.0-liter V6.
Whether you are tracing an electrical fault, servicing the vehicle, or planning a major repair, the correct manual provides more useful guidance than general instructions.
Find the Right Peugeot 807 Manual for Your Vehicle
Choose your manual by matching the model year, engine size, fuel type, power output, and emissions system. Similar-looking engines may use different procedures, wiring, sensor locations, and tightening data.
Diesel owners should also check for a particle emission filter, described as FAP or PEF, because regeneration and additive-system information can differ.
Check before choosing
|
Examples in this category |
Why it matters |
| Model year |
2002 through 2014 |
Components and electrical systems can change by production period |
| Engine capacity |
1997 cc, 2179 cc, 2231 cc, and 2946 cc |
Identifies the correct engine family and service data |
| Fuel and output |
HDi 110/120/136/138/163/175 or petrol 138/143/170/V6 |
Matches fuel, ignition, turbo, and cooling procedures |
| Emissions equipment |
Standard diesel, FAP or PEF |
Ensures relevant particulate-filter diagnostics and maintenance |
| Vehicle classification |
Family saloon or commercial saloon listings |
Helps match the exact product record used for your vehicle |
For example, an early commercial-use diesel can be matched with the 2005 Peugeot 807 commercial saloon 2.0 HDi 110 manual, while later particulate-filter models require the relevant FAP or PEF version. Always confirm the registration year against the engine specification, as the year alone may not identify the correct manual.
What Is Included in a Peugeot 807 Workshop or Repair Manual?
A comprehensive Peugeot 807 repair manual is designed to support servicing, dismantling, inspection, adjustment, replacement, and reassembly. Workshop manual references for this model typically include adjustment data, tightening torques, wiring information, and routine maintenance guidance.
Depending on the selected manual, useful coverage may include:
- Engine maintenance and overhaul, including timing, lubrication, cooling, and cylinder-head work
- HDi diesel systems, turbocharger controls, fuel delivery, injectors, EGR, and emissions equipment
- Petrol engine management, ignition, intake, exhaust, and sensor testing
- Gearbox, clutch, and driveshaft procedures for applicable transmissions
- Brake, steering, and suspension repairs, including inspection and replacement steps
- Heating, air conditioning, body and interior systems, including sliding doors
- Technical specifications, fluid data, service limits, and tightening sequences
- Diagnostic procedures and wiring diagrams for circuits, fuses, and control modules
Common Peugeot 807 Repairs and Problems Covered
Owners often search for Peugeot 807 troubleshooting information when warning lights, rough running, reduced power, or intermittent electrical symptoms appear.
Used-car guidance has highlighted possible ECU-related misfires, poor running or non-starting, while parts and owner resources commonly discuss electric-window faults, reduced-power conditions, suspension wear, and sliding-door problems.
A model-specific service manual can help with structured checks for:
- Engine-management warnings, difficult starting, and rough idle
- Turbo boost, air intake, EGR, and fuel-pressure faults on HDi engines
- FAP/PEF blockage warnings, differential-pressure sensors, and additive-system servicing
- Clutch wear, gear-selection concerns, driveshaft vibration, and transmission leaks
- Brake servicing, ABS faults, suspension noise, bushes, and wheel bearings
- Cooling-system leaks, radiator-fan faults, and overheating diagnosis
- Air-conditioning, sliding-door, window, locking, and battery-related faults
On particulate-filter diesels, correct diagnosis is especially important. Community technical guidance notes that an additive-level warning or incorrect reset can prevent normal filter regeneration and may eventually lead to soot loading or reduced-power operation.
The Peugeot 807 2.0 HDi FAP workshop manual is therefore the more relevant choice for a matching FAP-equipped vehicle.
Wiring Diagrams and Electrical Troubleshooting
The Peugeot 807 uses multiple control modules, sensors, powered accessories, and convenience systems, making a Peugeot 807 wiring diagram valuable for fault finding.
A suitable manual can help identify fuse and relay locations, connector pinouts, earth points, power feeds, and circuit paths before parts are replaced.
Owner discussions frequently mention electrical niggles and faults with powered sliding doors. A commonly suggested first check is to clean and inspect the door-to-body electrical contacts.
Use wiring information, multimeter readings, and scan results to distinguish failed components from damaged wiring, low voltage, poor grounding, or communication faults. This is useful for windows, locks, airbags, climate control, starting, lighting, and engine management circuits.
Peugeot 807 Manual Types and Engine Coverage
To ensure you have the most effective repair and diagnostic data, it is essential to match your workshop manual to your vehicle’s specific powertrain configuration.
These specialized guides are tailored to the engine capacity, fuel type, and emissions control systems found on your model, providing precise technical procedures for maintenance and troubleshooting.
Using the correct version helps you accurately identify components, wiring layouts, and service intervals specific to your 807.
2.0 HDi 110 and 2.0 HDi 110 Particle-Filter Models
These cover the 1997 cc HDi 110 in family-saloon listings from 2002–2014 and commercial-saloon versions from 2002–2005. Separate particle-filter products provide more relevant information on emissions and regeneration.
2.0 HDi 120, 138, 163 and FAP/PEF Versions
Choose the power output shown on the vehicle record. The 2.0 HDi 120 manual supports diesel servicing, while the 138 and 163 PEF/FAP versions cover later turbo-diesel and filter systems.
Owners of the higher-output version can use the 2014 Peugeot 807 2.0 HDi 163 service and repair manual when that year and specification match. The DW10CBDTR-labelled 2.0 HDi FAP listing should be selected where that engine identification is confirmed.
2.0i 16V 138 and 143 Petrol Models
These cover ignition, injection, cooling, timing, emissions, and engine management for the 138 hp and 143 hp petrol variants, without irrelevant HDi or FAP procedures.
2.2 HDi 136 and 175 PEF Models
The 2179 cc 2.2 HDi 136 manual covers the lower-output diesel, while the 2.2 HDi 175 listing suits the more powerful particle-filter version. For a matching later vehicle, see the 2014 Peugeot 807 2.2 HDi 175 workshop manual.
2.2i 16V 170 Petrol Models
This type is specific to the 2.2-liter 16-valve petrol engine and includes relevant fuel, ignition, and engine control procedures. Match it to the listed year.
3.0i V6 24V 210 and 211 Models
V6 owners should distinguish between the 210 and 211 listings and confirm the engine code and year. The 2014 Peugeot 807 3.0i V6 24V 210 manual is aimed at the later 210 specification, while earlier 211 products cover the corresponding 2002–2008 records. These manuals are useful for V6-specific timing, cooling, ignition, intake, and automatic-transmission-related work.
Family Saloon, Commercial Saloon, and Year-Specific Manuals
Family-saloon listings cover passenger 807 models, while commercial-saloon products focus on the early 2.0 HDi 110. Year-specific manuals from 2002 to 2014 help separate similar engine records.
Commonly Asked Questions About the Peugeot 807 Workshop Manual
Is a Workshop Manual the Same as an Owner’s Manual?
No. An owner’s handbook explains vehicle operation and basic checks. A workshop or factory service manual goes further, covering repair procedures, component removal, testing, specifications, wiring, and technical servicing.
Can I Use One Peugeot 807 Manual for Every Engine?
A general-body manual may cover some information, but engine, emissions, and electrical procedures can differ. Match the manual to the exact year, capacity, fuel type, output, and FAP/PEF status.
Does the Manual Include a Peugeot 807 Wiring Diagram?
Many workshop manuals include electrical schematics or circuit information, but coverage can vary. Check the product description when wiring diagrams are your main requirement.
Which Manual Do I need for a 1997 cc Peugeot 807?
The 1997 cc capacity may refer to several 2.0-liter petrol or HDi versions. Confirm whether the engine is petrol or diesel, then identify its power output and particulate-filter specification before choosing.
Select the Peugeot 807 service manual PDF that matches your vehicle details as closely as possible. The correct year-and-engine manual gives you clearer procedures, more relevant wiring information, and better support for safe maintenance and accurate repairs.
