Check the transmission fluid level and condition.

Ensure the engine is tuned up and running smoothly.

Consider upgrading the transmission to a modern overdrive unit for improved performance.

Consult a vintage car specialist for further advice on enhancing drivability.

The manual suggests exploring the manual's transmission section for tips on optimizing performance and potential upgrades.

Regularly check the coolant level and condition.

The radiator, the water pump, and the hoses should be checked for leaks or damage.

Flush and replace the coolant-antifreeze every 36,000 miles or two years.

Consider installing an auxiliary electric cooling fan for improved heat dissipation.

Recommendation: Refer to the manual's cooling system maintenance guide for detailed instructions on preventing overheating.

Periodically inspect the brake pads, rotors, and drums for wear.

Adjust the brakes as needed to maintain proper clearance and pedal feel.

The brake system should be bled to remove air and to ensure a consistent level of braking performance.

Upgrade to modern brake components for improved stopping power if desired.

Suggestion from the manual: Check the manual's brake adjustment section for guidance on maintaining optimal braking performance.

Inspecting the wiring harness for signs of damage or corrosion is important.

Test electrical components such as switches, lights, and gauges for proper function.

Clean or replace faulty electrical connections and switches as needed.

Consider upgrading to modern wiring harnesses for improved reliability.

Recommended: Consult the manual's electrical troubleshooting section for assistance in diagnosing and repairing electrical issues.

Thoroughly inspect the body, undercarriage, and frame for rust spots.

Wire brush and rust converter can be used to remove surface rust.

Repair or replace rusted panels and components as necessary.

Apply rust-inhibiting coatings or undercoating to prevent future corrosion.

Check out the manual's rust prevention techniques for detailed instructions on addressing rust and corrosion.

Regularly inspect fuel lines, filters, and the carburetor for signs of wear or clogging.

Clean or replace fuel filters and carburetor components as needed.

Use high-quality fuel additives to keep the fuel system clean and lubricated.

It is recommended that your fuel injection system be upgraded to a modern system for improved efficiency and reliability.

Observation: Check the manual's fuel system maintenance section for guidance on inspecting and servicing the fuel system.