1978 Ford Capri II 1600 L (low compr.) – Workshop Service & Repair Manual

1. Inspect: Check the fenders and rockers for visible rust spots and damage.
2. Clean: Remove loose rust and debris using a wire brush or sandpaper.
3. Apply Rust Converter: Treat the affected areas with a rust converter to neutralize rust.
4. Prime and Paint: Apply a primer followed by matching paint to protect against further rusting.

For detailed instructions and tips on rust prevention and repair, refer to our comprehensive manual.

1. Check Fuses: Inspect and replace any blown fuses in the fuse box.
2. Test Battery: Ensure the battery is fully charged and connections are clean.
3. Inspect Wiring: Look for damaged or corroded wiring and repair or replace as needed.
4. Check Alternator: Test the alternator to ensure it is charging the battery properly.

Our manual includes detailed electrical schematics and troubleshooting steps to help you resolve electrical issues.

1. Inspect: Look for signs of leaks or blockages in the carburetor.
2. Clean: Disassemble and clean the carburetor using a carburetor cleaner.
3. Adjust: Adjust the idle and mixture screws according to the manufacturer's specifications.
4. Replace Parts: Replace any worn or damaged components, such as gaskets or jets.

Access our manual for step-by-step cleaning and adjustment procedures to ensure your carburetor functions smoothly.

1. Identify Source: Locate the source of the leak by checking the transmission pan and seals.
2. Tighten Bolts: Ensure that all bolts on the transmission pan are properly tightened.
3. Replace Seals: Replace any worn or damaged seals and gaskets.
4. Check Fluid Levels: Refill the transmission fluid to the correct level if necessary.

Our manual provides detailed guidance on transmission maintenance and leak repairs.

1. Inspect Coolant Levels: Check the coolant level and top up if needed.
2. Check for Leaks: Examine the radiator, hoses, and connections for leaks.
3. Test Thermostat: Ensure the thermostat is functioning properly by testing its opening temperature.
4. Flush System: Perform a coolant system flush to remove debris and ensure efficient cooling.

Refer to our manual for comprehensive instructions on cooling system maintenance and troubleshooting.