1978 Ford Capri II 3000 S automatic – Workshop Service & Repair Manual

1. Identify Rust Areas: Inspect the sills, door jambs, and floors for visible rust.
2. Clean the Affected Area: Remove loose rust using a wire brush or sandpaper.
3. Apply Rust Converter: Use a rust converter to neutralize remaining rust.
4. Prime and Paint: Apply primer followed by paint to protect against future rust.
5. Regular Inspections: Perform regular inspections and address any new rust promptly.

For detailed rust repair procedures and preventive measures, refer to our comprehensive repair manual.

1. Check Fuses: Inspect and replace any blown fuses.
2. Examine Wiring: Look for damaged or loose wires and connectors.
3. Test Battery and Alternator: Ensure the battery is charged and the alternator is functioning.
4. Inspect Ground Connections: Verify that all ground connections are secure.
5. Consult Wiring Diagrams: Use our manual’s wiring diagrams for troubleshooting.

For complete electrical troubleshooting and repair guidance, consult our detailed workshop manual.

1. Inspect Fuel Lines: Check for leaks or blockages in the fuel lines.
2. Clean the Fuel Filter: Replace or clean the fuel filter if it’s clogged.
3. Examine the Fuel Pump: Ensure the fuel pump is functioning correctly.
4. Check Fuel Injectors: Clean or replace any malfunctioning fuel injectors.
5. Test Fuel Pressure: Use a fuel pressure gauge to ensure proper fuel pressure.

Our manual provides step-by-step instructions for fuel system repairs and maintenance.

1. Inspect Suspension Components: Check shock absorbers, struts, and bushings for wear.
2. Replace Worn Parts: Replace any worn or damaged suspension components.
3. Align the Wheels: Ensure proper wheel alignment to prevent uneven wear.
4. Check for Leaks: Look for leaks in the suspension system and address them.
5. Regular Maintenance: Follow regular maintenance schedules to prolong suspension life.

For comprehensive guidance on suspension maintenance and repairs, refer to our detailed manual.

1. Check Coolant Level: Ensure the coolant level is adequate and top up if necessary.
2. Inspect Radiator: Look for blockages or leaks in the radiator.
3. Test the Thermostat: Replace the thermostat if it’s not opening properly.
4. Examine Hoses: Check hoses for cracks or leaks and replace them if needed.
5. Flush the Cooling System: Perform a coolant flush to remove debris.

For in-depth troubleshooting and cooling system repair instructions, consult our workshop manual.