2004 Ford Focus C-Max 1.6 16V LX – Workshop Service & Repair Manual

1. Check the Brake Fluid Level: Ensure the brake fluid level is adequate.
2. Inspect the Parking Brake Motor: Remove the motor and check for any signs of damage or wear.
3. Reset the System: Use a diagnostic tool to reset the electronic parking brake system.
4. Replace Faulty Components: If the motor or control module is faulty, replace them as necessary.

Our manual provides detailed instructions and troubleshooting steps for resolving electronic parking brake issues effectively.

1. Check for Obstructions: Ensure there are no obstructions blocking the wiper mechanism.
2. Inspect Wiring and Connections: Look for damaged wires or loose connections.
3. Test the Wiper Motor: Use a multimeter to check the motor's electrical connections and operation.
4. Replace the Wiper Motor: If the motor is overheating due to internal faults, consider replacing it.

Our manual offers step-by-step guidance for diagnosing and repairing wiper motor overheating issues.

1. Check Spark Plugs: Inspect and replace worn or damaged spark plugs.
2. Examine Ignition Coils: Test ignition coils and replace any that are faulty.
3. Inspect Fuel Injectors: Clean or replace clogged fuel injectors.
4. Verify Engine Timing: Ensure the engine timing is correctly set.

Our manual provides detailed procedures for troubleshooting and fixing misfires, including spark plug and injector maintenance.

1. Check Fuse Box: Inspect the fuse box for any blown fuses related to the instrument panel.
2. Test Wiring Connections: Look for loose or damaged wiring connections behind the instrument panel.
3. Inspect the Instrument Cluster: Check for any visible damage or faults within the cluster.
4. Replace Faulty Components: If necessary, replace the instrument cluster or related components.

Our manual contains detailed diagnostic and repair instructions for instrument panel failures.

1. Inspect the Air Filter: Replace a clogged air filter to ensure proper air flow.
2. Check the Fuel System: Examine the fuel pump and filter for any blockages or issues.
3. Examine the Throttle Body: Clean the throttle body to ensure smooth operation.
4. Test the Cam Chain: Inspect and adjust the cam chain tension if necessary.

Our manual includes comprehensive information on diagnosing and resolving low-rev power issues.