2006 Ford Focus C-Max 1.6 TDCi (110) Trend DPF Durashift-cvt (cont. variable) – Workshop Service & Repair Manual

1. Check Transmission Fluid: Ensure the transmission fluid level is adequate and that the fluid is clean.
2. Inspect for Leaks: Look for any fluid leaks around the transmission area.
3. Examine the CVT Belt: Check for wear or damage to the CVT belt, as this can affect shifting performance.
4. Reset Transmission Control Module: Sometimes, a reset can resolve shifting issues. Consult the manual for instructions on how to perform this reset.
5. Consult the Manual: Follow the detailed troubleshooting and repair procedures provided in the workshop manual for further guidance.

Our workshop manual offers comprehensive instructions to help you diagnose and repair transmission issues, ensuring smooth and reliable performance.

1. Check for Leaks: Inspect the turbocharger and its hoses for any signs of leaks.
2. Verify Boost Pressure: Use a diagnostic tool to measure the turbo boost pressure and ensure it meets the specifications.
3. Inspect the Turbo Wastegate: Ensure the wastegate is functioning properly and is not stuck or damaged.
4. Clean the Turbocharger: Remove any carbon deposits or blockages that may affect performance.
5. Consult the Manual: Refer to the manual for detailed cleaning and troubleshooting procedures.

Our manual provides detailed solutions for turbocharger issues, helping you restore optimal engine performance.

1. Check Battery Voltage: Test the battery to ensure it is properly charged and functioning.
2. Inspect the Alternator Belt: Look for wear or looseness in the alternator belt and replace it if necessary.
3. Test Alternator Output: Use a multimeter to check the alternator’s output voltage to ensure it is within the recommended range.
4. Replace the Alternator: If the alternator is not functioning correctly, replace it with a new one.
5. Consult the Manual: Follow the manual for detailed testing and replacement instructions.

Our manual includes step-by-step guidance for diagnosing and fixing alternator problems, ensuring your vehicle's electrical system is reliable.

1. Check for Error Codes: Use a diagnostic tool to read error codes and identify the cause of limp-home mode.
2. Inspect Engine Sensors: Ensure all engine sensors are working correctly and replace any faulty sensors.
3. Examine the Transmission: Look for any transmission issues that might trigger limp-home mode.
4. Reset the ECU: Reset the engine control unit (ECU) to clear limp-home mode and monitor if it reactivates.
5. Consult the Manual: Refer to the manual for specific troubleshooting steps related to limp-home mode.

Our manual offers detailed procedures for diagnosing and resolving limp-home mode issues, helping you restore full vehicle functionality.

1. Check Alignment: Ensure the wheel alignment is correctly set to avoid uneven tyre wear.
2. Monitor Tyre Pressure: Regularly check and maintain the proper tyre pressure as specified in the manual.
3. Rotate Tyres Regularly: Perform regular tyre rotations to ensure even wear across all tyres.
4. Inspect Suspension Components: Check for any worn suspension parts that could contribute to uneven tyre wear.
5. Consult the Manual: Follow the manual’s guidelines for tyre care and alignment.

Our manual provides essential maintenance tips and procedures to help you manage and prevent front tyre wear effectively.