2006 Ford Focus C-Max 1.8 16V Fun Durashift-cvt (cont. variable) – Workshop Service & Repair Manual

1. Check Battery Connections: Ensure the battery terminals are clean and tightly connected.
2. Inspect Fuses: Look for any blown fuses and replace them as needed.
3. Examine Wiring: Look for any damaged or frayed wiring and repair or replace it.
4. Test Electrical Components: Use a multimeter to test switches, relays, and sensors.
5. Consult Wiring Diagrams: Refer to the manual for specific wiring diagrams and troubleshooting steps.

Our manual provides detailed diagrams and troubleshooting tips for electrical issues, ensuring you can effectively resolve these problems.

1. Check Engine Oil Level: Ensure the engine oil is at the correct level and top it up if necessary.
2. Inspect for Leaks: Look for oil leaks that might affect engine lubrication.
3. Examine Timing Chain/Belt: Inspect the timing chain or belt for wear or looseness.
4. Listen for Specific Sources: Identify if the noise is coming from the valves or other engine components.
5. Consult the Manual: Follow step-by-step engine inspection procedures as detailed in the manual.

The manual includes comprehensive instructions for diagnosing and addressing engine noises, helping you pinpoint the issue accurately.

1. Check Turbocharger Oil Supply: Ensure the turbocharger is receiving adequate oil.
2. Inspect for Leaks: Look for oil or air leaks in the turbocharger system.
3. Examine the Turbocharger: Check for signs of damage or wear in the turbocharger unit.
4. Test Boost Pressure: Use a boost gauge to verify that the turbo is producing the correct pressure.
5. Consult Maintenance Guidelines: Refer to the manual for specific turbo maintenance and repair procedures.

Our manual offers detailed maintenance schedules and repair tips for turbochargers, helping you keep your system in optimal condition.

1. Check for Diagnostic Codes: Use a scan tool to read the error codes from the engine control unit (ECU).
2. Inspect Transmission Fluid Level: Ensure the transmission fluid is at the proper level and in good condition.
3. Examine Sensors: Check the performance of sensors like the throttle position sensor (TPS) and mass airflow sensor (MAF).
4. Review Recent Repairs: Consider whether recent repairs could have triggered limp-home mode.
5. Follow Reset Procedures: Refer to the manual for steps to reset the ECU and troubleshoot limp-home mode.

The manual provides detailed instructions for diagnosing and resolving limp-home mode issues, helping you restore full functionality.

1. Identify the Source: Pinpoint the area of the cabin where the squeaks are coming from.
2. Inspect Interior Trim: Check and tighten any loose or misaligned interior trim pieces.
3. Lubricate Moving Parts: Apply lubricant to door hinges, seat mechanisms, and other moving parts.
4. Check for Debris: Remove any debris or foreign objects that might be causing the squeak.
5. Refer to the Manual: Follow specific steps and recommendations for addressing cabin noises.

Our manual includes detailed instructions on identifying and fixing cabin squeaks, ensuring a quieter and more comfortable ride.