2010 Ford C-Max 1.6 Ti-VCT (125) Titanium – Workshop Service & Repair Manual

1. Check Coolant Level: Ensure the coolant level in the reservoir is adequate. If it’s low, top it up with the recommended coolant.
2. Inspect for Leaks: Look for visible leaks around the radiator and hoses.
3. Examine the Radiator Cap: Make sure the radiator cap is properly sealed and not damaged.
4. Test the Thermostat: A faulty thermostat can cause overheating. Test it and replace if necessary.
5. Check the Water Pump: Ensure the water pump is functioning correctly, as a malfunction can lead to overheating.

Our Manual Can Help: The manual provides detailed instructions on cooling system maintenance and troubleshooting steps to prevent and address overheating issues.

1. Inspect Timing Belt: Regularly check the timing belt for signs of wear, such as cracks or fraying.
2. Replace Timing Belt: Follow the recommended replacement interval in the manual to avoid potential engine damage.
3. Check Tension: Ensure the timing belt tension is within specifications. Adjust if necessary.
4. Look for Alignment Issues: Verify that the timing belt and its components are properly aligned to prevent misalignment.

Our Manual Can Help: The manual includes step-by-step procedures for inspecting, replacing, and adjusting the timing belt to maintain optimal engine performance

1. Check Fuses: Inspect and replace any blown fuses related to the electrical system.
2. Inspect Wiring: Look for damaged or loose wiring connections, especially around the fuse box and battery.
3. Test Battery: Ensure the battery is fully charged and the terminals are clean and tightly connected.
4. Diagnose Faults: Use a diagnostic tool to identify any error codes related to electrical issues.

Our Manual Can Help: Our manual provides a comprehensive guide to diagnosing and repairing electrical problems, including wiring diagrams and fuse box layouts.

1. Identify the Source: Inspect the radiator, hoses, and water pump for leaks.
2. Replace Damaged Components: Replace any damaged hoses, radiator, or water pump.
3. Seal Small Leaks: Use a suitable coolant sealant for minor leaks if applicable.
4. Test the System: After repairs, run the engine and check for leaks again.

Our Manual Can Help: The manual offers detailed instructions for locating and fixing coolant leaks, along with tips for ensuring a proper repair.

1. Check Transmission Fluid: Verify that the transmission fluid is at the correct level and is clean. Top up or replace if necessary.
2. Inspect for Leaks: Look for leaks around the transmission and repair any damaged seals.
3. Test Shifting: Ensure the transmission shifts smoothly. If it doesn’t, the issue might be internal.
4. Consult a Mechanic: For persistent problems, consult a professional mechanic for a thorough inspection.

Our Manual Can Help: The manual includes comprehensive troubleshooting steps and maintenance tips for transmission issues, helping you address and resolve problems effectively.