Home Peugeot 2010 Peugeot 5008 1.6 HDi FAP 112 (110) – Workshop Service & Repair Manual

2010 Peugeot 5008 1.6 HDi FAP 112 (110) – Workshop Service & Repair Manual

MODEL5008 1st generation

Explore the Road with Confidence: 2010 Peugeot 5008 1.6 HDi FAP 112 (110) Workshop Service and Repair Manual

Unlock the full potential of your 2010 Peugeot 5008 1.6 HDi FAP 112 (110) with our comprehensive Workshop Service & Repair Manual. Tailored specifically for this model, this manual is an essential resource for DIY enthusiasts and professional mechanics alike.

A few key features are:

Thorough Coverage: Delve into detailed instructions covering every aspect of your Peugeot 5008, providing you with a comprehensive understanding of its mechanics, from the 1.6 HDi FAP engine to its advanced safety and comfort features.

Clear and Concise Guidance: Each step is easy to understand, accompanied by clear diagrams and illustrations. This ensures that even the most complex repairs and maintenance tasks are manageable, facilitating smooth restoration processes.

Expert Insights: Benefit from valuable insights and tips from experienced mechanics with hands-on experience working with Peugeot vehicles. These expert recommendations will enhance your efficiency and proficiency during repairs and restorations.

Electrical System Assistance: Detailed wiring diagrams and electrical system information are provided to aid in the accurate diagnosis and resolution of electrical issues, ensuring your Peugeot 5008 remains in optimal condition.

The following are covered:


  • Engine Components & Diagnostics.
  • Fuel System.
  • Ignition System.
  • Exhaust System.
  • Transmission & Drivetrain.
  • Steering & Suspension.
  • Brakes & Traction Control.
  • Heating & Air Conditioning.
  • Electrical System.
  • Instrumentation & Warning Indicators.
  • Windows, Glass, and Wipers.
  • Lighting System.
  • Body & Frame.
  • Restraints & Safety Systems.


  • Fluid Checks & Replacements.
  • Filters & Belts.
  • Scheduled Service Intervals.
  • Tire Rotation & Replacement.
  • Brake Inspection & Service.
  • Battery Maintenance.
  • Cooling System Checks.
  • Routine Inspections for Optimal Performance.

Printable: Yes

Compatibility: Works seamlessly with various electronic devices, including PC and Mac computers, tablets, and smartphones.

Requirements: Adobe Reader, Foxit (free)

This Workshop Service and Repair Manual for the 2010 Peugeot 5008 1.6 HDi FAP 112 (110) provides you with the knowledge and guidance necessary to maintain, diagnose, and repair your vehicle efficiently. It empowers you to confidently tackle restoration tasks, ensuring reliability and performance on the road.

  • How can I address electronic handbrake failure?

    Reset Handbrake: Try resetting the electronic handbrake system by switching it on and off multiple times.

    Check Electrical Connections: Inspect the electrical connections to the handbrake system for any loose or damaged wires.

    Manual Suggestion: Refer to the electronic handbrake troubleshooting section for guidance on resetting procedures and electrical checks.

  • What should I do if the windscreen trim detaches?

    Inspect Trim: Check the condition of the windscreen trim for any signs of detachment or damage.

    Reattach Trim: If the trim is loose, carefully reattach it using adhesive designed for automotive trim.

    Replace Trim: If the trim is damaged, consider replacing it with a new one to prevent further issues.

  • How can I prevent water from leaking into the rear doors?

    Inspect the door seals thoroughly for any indications of wear or damage. Damage or wear that may allow water ingress.

    Reapply Sealant: Apply automotive sealant around the edges of the rear doors to create a watertight seal.

    Drainage Check: Ensure that any drainage channels or holes in the door frame are clear of debris so that water can drain properly.

    Recommendation: Refer to the door seal maintenance section for instructions on inspecting and resealing door seals.

  • What steps should I take if I notice fuel or oil leaks?

    It is crucial to identify the source of the leak and its precise origin by inspecting the engine compartment and underneath the vehicle.

    Tighten Connections: Tighten loose fuel or oil line connections to prevent leaks.

    Replace Seals: To prevent leaks, replace any worn or damaged seals or gaskets in the fuel or oil system.

  • How can I prevent rough idle and hard starts, especially in cold weather?

    Check Fuel Quality: Ensure you use high-quality diesel fuel to prevent issues with cold starting.

    Inspect Glow Plugs: Check the glow plugs for proper operation and replace any faulty ones.

    Fuel System Inspection: Inspect the fuel system for leaks or air ingress that may affect starting performance.

    Suggestion: The engine troubleshooting section provides detailed steps for diagnosing and resolving rough idle and hard start issues.

  • What should I do if I suspect issues with the particulate filter?

    Take Longer Runs: Take the vehicle on longer drives at highway speeds to allow the particulate filter to regenerate.

    Inspect the exhaust system for any issues. Any blockages or damage affecting filter regeneration.

Remember that these are common issues owners report, and individual experiences may vary. Maintaining your vehicle regularly and performing timely repairs can reduce the severity of these problems. Consider consulting a professional mechanic for proper diagnosis and resolution if you encounter any of these issues.



There are no reviews yet.

Be the first to review “2010 Peugeot 5008 1.6 HDi FAP 112 (110) – Workshop Service & Repair Manual”

Your email address will not be published.

Original price was: $99.99.Current price is: $14.99.

2010 Peugeot 5008 1.6 HDi FAP 112 (110) – Workshop Service & Repair Manual

Original price was: $99.99.Current price is: $14.99.

MODEL5008 1st generation

Out of stock

File Format: pdf
SKU: NXT-Peugeot-5271 Brand: Tag:

Out of stock