2012 Ford Focus 1.6 TDCi (115) Trend (Zetec) – Workshop Service & Repair Manual

1. Check Transmission Fluid: Ensure the fluid is at the correct level and in good condition.
2. Inspect for Leaks: Look for any signs of transmission fluid leaks and repair as needed.
3. Update Software: Have the transmission control module (TCM) software updated by a professional.
4. Replace Faulty Parts: If shuddering persists, consider replacing worn transmission components such as the clutch pack or solenoids.

Our workshop manual provides detailed instructions on diagnosing and fixing transmission issues. Get your manual today to ensure smooth shifting and optimal performance!

1. Inspect Hoses: Check all coolant hoses for signs of wear or leaks and replace any damaged hoses.
2. Check the Radiator: Inspect the radiator for leaks or corrosion.
3. Examine the Water Pump: Ensure the water pump is functioning correctly and replace if necessary.
4. Install ‘Degas’ Hose: Verify if the new ‘Degas’ hose has been retrofitted to prevent leaks.

Our workshop manual includes step-by-step guidance on fixing coolant leaks and maintaining your cooling system. Download your copy now for comprehensive repair instructions!

1. Inspect Clutch Fluid: Ensure the clutch fluid is at the correct level and free from contamination.
2. Check Clutch Pedal: Test the clutch pedal for smooth operation and adjust if necessary.
3. Replace Clutch Components: If experiencing clutch slip or difficulty in gear engagement, replace the clutch disc, pressure plate, and release bearing.

Our workshop manual provides detailed procedures for diagnosing and repairing clutch issues. Get your manual today to maintain smooth and reliable clutch operation!

1. Inspect Rubber Pipes: Check the rubber pipes attached to the DPF for perishing and replace if necessary.
2. Perform a DPF Regeneration: Use the manual to guide you through a DPF regeneration process to clear blockages.
3. Use Quality Fuel: Ensure you are using high-quality diesel fuel to reduce the risk of DPF clogging.
4. Drive at Highway Speeds: Regularly drive at highway speeds to allow the DPF to regenerate properly.

Our workshop manual includes detailed instructions on maintaining and unclogging the DPF. Download your manual today to keep your emission system in top condition!

1. Inspect for Rust: Regularly check the front wheel arches for signs of rust and address immediately.
2. Clean and Treat: Clean the area thoroughly and treat with a rust inhibitor.
3. Apply Protective Coating: Use a high-quality protective coating to prevent future rust formation.
4. Touch-Up Paint: Use touch-up paint to cover any exposed metal areas.

Our workshop manual offers comprehensive guidance on preventing and treating rust. Get your manual now to protect your vehicle’s bodywork!