1. Check Battery and Connections: Ensure the battery is fully charged and connections are secure. Clean any corrosion from terminals.
2. Inspect Fuses: Examine the fuse box for any blown fuses. Replace them with the correct amperage fuses.
3. Test Electrical Components: Use a multimeter to test components like the alternator and starter. Replace faulty components as necessary.
4. Check Wiring: Look for damaged or loose wiring and repair or replace as needed.
5. Consult Wiring Diagrams: Use the manual’s wiring diagrams for detailed troubleshooting and component identification.

Our Workshop Service & Repair Manual provides detailed troubleshooting steps for electrical issues, ensuring you can efficiently address and resolve electrical problems in your Peugeot 3008.

1. Diagnose the Issue: Check for symptoms of injector failure, such as poor engine performance, increased fuel consumption, or rough idling.
2. Inspect Injectors: Remove the injectors and inspect them for clogging or damage.
3. Clean or Replace Injectors: Clean the injectors using a professional cleaning solution or replace them if they are beyond repair.
4. Test Injector Operation: Reinstall the injectors and test their operation using diagnostic tools.
5. Check Fuel Quality: Ensure you’re using high-quality diesel fuel to prevent future issues.

The manual offers comprehensive guidance on diagnosing and replacing diesel injectors, helping you restore your vehicle’s performance.

1. Check DPF Warning Light: If the DPF warning light is on, it indicates a potential blockage.
2. Perform a Regeneration: Follow the manual’s instructions to perform a forced regeneration to clear the filter.
3. Inspect for Blockages: Check the DPF and exhaust system for blockages and clear them if necessary.
4. Check Sensor Readings: Verify the readings from DPF sensors using a diagnostic tool.
5. Replace the DPF: If the filter is excessively clogged or damaged, consider replacing it.

Our manual includes detailed procedures for maintaining and troubleshooting the DPF, ensuring your vehicle continues to meet emissions standards.

1. Check Transmission Fluid Levels: Ensure that the transmission fluid is at the proper level and in good condition.
2. Inspect for Leaks: Look for any leaks in the transmission system and repair them.
3. Check for Error Codes: Use a diagnostic scanner to check for transmission error codes and address any identified issues.
4. Perform a Transmission Service: Follow the manual’s instructions for flushing and refilling the transmission fluid.
5. Test Gear Shifting: After servicing, test the gearbox for smooth shifting and correct any remaining issues.

Our Workshop Service & Repair Manual provides step-by-step instructions for diagnosing and fixing automatic gearbox issues, helping you ensure smooth and reliable transmission performance.

1. Inspect HVAC Controls: Ensure that all controls are functioning properly and set to the correct settings.
2. Check Coolant Levels: Verify that the coolant levels are sufficient, as low levels can affect heating performance.
3. Replace Cabin Air Filter: A clogged cabin air filter can impede airflow. Replace it if necessary.
4. Check for Blockages: Inspect the vents and ducts for any blockages or obstructions.
5. Test the System: Use the manual’s troubleshooting guide to test the heating and ventilation system for proper operation.

The manual offers detailed steps for diagnosing and repairing HVAC system issues, helping you maintain a comfortable and functional cabin environment.